TM 9-2320-272-24-2
3-374. INSIDE TELEPHONE JACK POST REPLACEMENT
THIS TASK COVERS:
b. Installation
a. Removal
REFERENCES (TM)
APPLICABLE MODELS:
TM 9-2320-272-10
M934/A1/A2
TM 9-2320-272-24P
TOOLS
EQUIPMENT CONDITION
General mechanic's tool kit (Appendix E, Item 11
Parking brake set (TM 9-2320-272-10).
NOTE
Inside telephone jack posts are located on van ceiling next to
emergency light and on left rear panel below fire extinguisher.
Both telephone jack posts are replaced the same. This procedure is
for rear panel telephone jack post.
1.
Remove four screws (6) and pull junction box (4) away from panel (7).
NOTE
Ceiling telephone jack posts are connected with one wire.
Tag all leads for installation.
2.
Remove screw (1), two leads (2), nut (8), and telephone jack post (5) from grommet (3) and junction
box (4).
3.
Remove grommet (3) from junction box (4).
1.
Install grommet (3) on junction box (4).
2.
Install telephone jack post (5) on grommet (3) and junction box (4) with nut (8).
3.
Install two leads (2) on telephone jack post (5) with screw (1).
3-918
