TM 9-2320-272-24-2
3-282. WINDSHIELD WASHER HOSES REPLACEMENT
THIS TASK COVERS:
b. Installation
a. Removal
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
TM 9-2320-272-10
All
TM 9-2320-272-24P
TOOLS
General mechanic's tool kit (Appendix E, Item 1)
EQUIPMENT CONDITION
l Parking brake set (TM 9-2320-272-10).
l Hood raised and secured (TM 9-2320-272-10).
Instrument cluster removed (para. 3-83).
l
a. Removal
1.
Remove wire clamp (6) and air supply line (7) from washer control valve outlet adapter (5).
2.
Remove wire clamp (11) and air supply line (7) from washer bottle air inlet adapter (9).
3.
Remove air supply line (7) from grommet (8) and firewall (14).
4.
Disconnect washer jet supply tube (12) from outlet adapter (10).
5.
Disconnect washer jet supply tube (12) from tee (13), grommet (3), and firewall (14).
6.
Disconnect two windshield washer jet supply tubes (2) from washer jet adapters (1).
7.
Remove two windshield washer jet supply tubes (2) from tee (13).
b. Installation
1.
Connect two windshield washer jet supply tubes (2) to tee (13) under cowl (4).
2.
Connect two windshield washer jet supply tubes (2) to washer jet adapters (1).
3.
Push washer jet supply tube (12) through grommet (3) in firewall (14) and connect to tee (13).
4.
Connect washer jet supply tube (12) to outlet adapter (10).
5.
Install air supply line (7) on washer bottle air inlet adapter (9) with wire clamp (11).
6.
Push air supply line (7) through grommet (8) in firewall (14).
7.
Install air supply line (7) on washer control valve outlet adapter (5) with wire clamp (6).
3-760
