TM 9-2320-272-24-2
NOTE
Wheels and tires are rotated the same for all M939A1/A2 series
vehicles.
To maintain tread depth, tires must be rotated to match tread
wear as closely as possible (TM 9-2610-200-24).
Tires (14:00xR20) have unidirectional tread design and can be
installed in either direction.
Rotate wheels and tires as shown.
Apply proper torque to outer lug nuts. Failure to do so may result
in injury to personnel or damage to equipment.
1.
Install four rear wheels (1) on studs (3) with forty stud nuts (2). Hand-tighten stud nuts (2).
2.
Raise rear of vehicle, remove jack stands, and lower vehicle.
3.
Tighten forty stud nuts (2) 450-500 lb-ft (610-678 Nm) in sequence shown.
3-624
