TM 9-2320-272-24-2
THIS TASK COVERS:
a. Wheel and Tire Removal
d. Rear Wheel Installation
b. Inspection
e. Front Wheel Installation
c. Wheel and Tire Rotation
INITIAL SETUP:
APPLICABLE MODELS
EQUIPMENT CONDITION
M939A1/A2
Parking brake set (TM 9-2320-272-10).
Front wheel valve removed (para. 3-456).
TOOLS
Rear wheel valve removed (para. 3-457).
General mechanic's tool kit (Appendix E, Item 1)
GENERAL SAFETY INSTRUCTIONS
Torque wrench (Appendix E, Item 145)
Ensure lug nuts are properly torqued.
REFERENCES (TM)
TM 9-2320-272-10
TM 9-2320-272-24P
TM 9-2610-200-24
NOTE
Perform step 1 for M939A2 vehicles only.
Remove two nuts (6) and wheel weights (5) from two front wheels (2) and studs (4).
1.
2.
Loosen sixty stud nuts (7) on four rear wheels (1) and two front wheels (2).
Raise vehicle and place two jack stands under rear-rear axle, two jack stands under forward-rear
3.
axle (9), and two jack stands under front axle (3).
NOTE
Tag wheels for installation.
4.
Remove sixty stud nuts (7), two front wheels (2), and four rear wheels (1) from vehicle.
1.
Inspect wheel rims (8) for cracks, stud hole damage, and bends. Replace wheel rims (8) if cracked,
stud holes damaged or bent.
2.
Inspect tires for thread wear (TM 9-2610-200-24).
3-622
