TM
9-2320-272-24-l
THIS TASK COVERS:
b. Installation
a. Removal
REFERENCES (TM)
APPLICABLE MODELS
M931/A1/A2, M932/A1/A2
TM 9-2320-272-10
TM 9-2320-272-24P
Tools
General mechanic's tool kit (Appendix E, Item 1)
EQUIPMENT CONDITION
Parking brake ret (TM 9-2320-272-10).
MATERIALS/PARTS
Air reservoirs drained (TM 9-2320-272-10).
Lockwasher (Appendix D, Item 366)
GENERAL SAFETY INSTRUCTIONS
Antiseize tape (Appendix C, Item 72)
Do not disconnect air lines before draining air
reservoirs.
Do not disconnect air lines before draining air reservoirs. Small
parts under pressure may shoot out with high velocity, causing
injury to personnel.
1.
Remove coupling (1) from adapter (2).
2.
Remove adapter (2) from coupling hose (3).
3.
Remove coupling hose (3) from adapter (12).
4.
Remove adapter (12) from cutoff valve (4).
6.
Remove cutoff valve (4) from adapter (11).
6.
Remove air line (9) from elbow (8).
7.
Remove elbow (8) from adapter (11).
8.
Remove nut (7), lockwasher (6), adapter (11), and identification plate (5) from frame hole (10).
Discard lockwasher (6).
NOTE
Wrap all male pipe threads with antiseize tape before installation.
1.
Insert adapter (11) through identification plate (5) and frame hole (10) and install with new
lockwasher (6) and nut (7).
2.
Install elbow (8) on adapter (11).
3.
Install air line (9) on elbow (8).
4.
Install cutoff valve (4) on adapter (11).
5.
Install adapter (12) on cutoff valve (4).
6.
Install coupling hose (3) on adapter (12).
7.
Install adapter (2) on coupling hose (3).
8.
Install coupling (1) on adapter (2).
3-596
