TM 9-2320-272-24-1
NOTE
Left and right (service and emergency) rear couplings are
installed the same way.
Fittings must be cleaned and inspected for cracks and stripped
threads.
Wrap all male pipe threads with antiseize tape before
installation.
Install bracket (14) and plate (6) on frame rail (7) with two screws (5), washers (16), and new
1.
locknuts (17).
Install identification plate (12) on bracket (14) with two screws (8).
2.
Install valve (18), pipe nipple (19), elbow (20), connector (21), elbow (15), and pipe nipple (11) on
3.
bracket (14) and plate (6) with new lockwasher (4) and nut (3).
Install adapter (2) in connector (21).
4.
Connect air line (1) to adapter (2).
5.
Install air coupling (9) on pipe nipple (11).
6.
Install dummy coupling (10) and S-hook (13) on air coupling (9) and bracket (14).
7.
3-594
