TM 9-2320-272-24-1
3-151. FORWARD-REAR TO REAR-REAR PROPELLER SHAFT REPLACEMENT
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
All except M927/A1, M928/A1/A2, M934/A1/A2,
TM 9-2320-272-12
M935/A1/A2
TM 9-2320-272-10
TOOLS
EQUIPMENT CONDITION
General mechanic's tool kit (Appendix E, Item 1)
l Parking brake set (TM 9-2320-272-10).
Torque wrench (Appendix E, Item 148)
l Wheels chocked (TM 9-2320-272-10).
MATERIALS/PARTS
Sixteen locknuts (Appendix D, Item 291)
PERSONNEL REQUIRED
Two
a. Removal
1.
Remove eight locknuts (4), screws (3), and forward-rear to rear-rear axle propeller shaft (2) from
transfer case input flange (5). Discard locknuts (4).
2.
Remove eight locknuts (7), screws (1), and forward-rear to rear-rear axle propeller shaft (2) from
transmission output flange (6). Discard locknuts (7).
b. Installation
1.
Install forward-rear
to rear-rear axle propeller shaft (2) on transmission output flange (6) with eight
screws (1) and new
locknuts (7). Tighten locknuts (7) 32-40 lb-ft. (43-54 N.m).
2.
Install forward-rear
to rear-rear axle propeller shaft (2) on transfer case input flange (5) with eight
screws (3) and new
locknuts (4). Tighten locknuts (4) 32-40 lb-ft (43-54 N.m).
3-420
