TM 9-2320-272-24-1
3-133. TRANSMISSION OIL SERVICE INSTRUCTIONS (Contd)
f. Replenishing Oil
NOTE
Refer to LO 9-2320-272-12 for drain and refill capacity and
recommended grade of transmission oil.
Open access door (2) inside vehicle cab and remove transmission oil dipstick (1) from transmission
1.
oil dipstick tube (3).
Add recommended quantity of transmission oil in transmission oil dipstick tube (3).
2.
Install transmission oil dipstick (1) in dipstick tube (3).
3.
WARNING
Exhaust gases can kill. Operate vehicle only in a well-ventilated
area. Failure to do so may result in injury to personnel.
Start engine (TM 9-2320-272-10), operate engine at 700-750 rpm until transmission oil reaches
4.
normal operating temperature of 120-220F (49-105C), then shut off engine.
NOTE
Begin shifting transmission through driving ranges only after
transmission oil has reached normal operating temperature.
Perform shifting procedure for approximately two minutes before
returning transmission to neutral and shutting off engine.
Shift transmission (4) through driving ranges to allow oil to circulate throughout transmission (4).
5.
Check transmission oil and fill to proper level (LO 9-2320-272-12).
6.
3-360
