TM 9-2320-272-24-1
3-118. FRONT AND REAR COMPOSITE LIGHT AND BRACKET REPLACEMENT (Contd)
NOTE
Left and right composite lights, covers, and brackets are replaced
the same way.
1.
Remove two locknuts (6), screws (12), and reflector (11) from bracket (5). Discard locknuts (6).
2.
Remove four locknuts (9), screws (13), and cover (8) from bracket (5). Discard locknuts (9).
NOTE
Tag wires for installation.
3.
Disconnect four connectors (10) from wires (14).
4.
Remove two screw-assembled lockwashers (7) and rear composite light (15) from bracket (5).
Dircard screw-assembled lockwashers (7).
5.
Remove nut (2), locknut (3), two screws (4), and bracket (5) from frame (1). Discard locknut (3).
j. Installation (M931/A1/A2)
1.
Install bracket (5) on frame (1) with two screws (4), new locknut (3), and nut (2).
2.
Install rear composite light (15) on bracket (5) with two new screw-assembled lockwashers (7).
3.
Connect four connectors (10) to wires (14).
4.
Install cover (8) on bracket (5) with four screws (13) and new locknuts (9).
5.
Install reflector (11) on bracket (5) with two screws (12) and new locknuts (6).
3-316