TM 9-2320-272-24-1
3-118. FRONT AND REAR COMPOSITE LIGHT AND BRACKET REPLACEMENT (Contd)
e. Removal (M936/A1/A2)
NOTE
Left and right composite lights and brackets are replaced the same
way.
1.
Remove two locknuts (14), screws (16), and reflector (15) from taillight guard (11). Discard
locknuts (14).
2.
Remove four screws (13), lockwashers (12), and taillight guard (11) from bracket (20). Discard
lockwasher (12).
NOTE
Tag wires for installation.
3.
Disconnect four connectors (17) from wires (18).
4.
Remove two screw-assembled lockwashers (10) and rear composite light (19) from bracket (20).
Discard screw-assembled lockwashers (10).
5.
Remove two locknuts (9), screws (8), and bracket (20) from ladder bracket (7). Discard locknuts (9).
f. Installation (M936/A1/A2)
1.
Install bracket (20) on ladder bracket (7) with two screws (8) and new locknuts (9).
2.
Install rear composite light (19) on bracket (20) with two new screw-assembled lockwashers (10).
3.
Connect four connectors (17) to wires (18).
4.
Install taillight guard (11) on bracket (20) with four new lockwashers (12) and screws (13).
5.
Install reflector (15) on taillight guard (12) with two screws (16) and new locknuts (14).
3-313
