TM 9-2320-272-24-1
3-113. TURN SIGNAL CONTROL AND INDICATOR LAMP REPLACEMENT
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
TM 9-2320-272-10
All
TM 9-2320-272-24P
TOOLS
General mechanic's tool kit (Appendix E, Item 1)
EQUIPMENT CONDITION
l Parking brake set (TM 9-2320-272-10).
l Battery ground cables disconnected (para. 3-126).
a. Removal
1.
Disconnect connector (9) from turn signal control (1).
2.
Remove clamp (7), signal self-canceller (8), and turn signal control (1) from steering column (6).
3.
Remove lamp lens (3) and lamp (2) from lamp socket (4).
b. Installation
1.
Install lamp (2) on lamp socket (4).
2.
Install lamp lens (3) on turn signal control (1).
3.
Align signal self-canceller (8) with cancelling pin (5), and install turn signal control (1) on steering
column (6) with clamp (7).
4.
Connect connector (9) to turn signal control (1).
Connect battery ground cables (para. 3-126).
FOLLOW-ON TASKS:
l
Check turn signal control for proper operation (TM 9-2320-272-10).
l
3-302
