TM 9-2320-272-24-1
3-108. MAIN LIGHT SWITCH REPLACEMENT
THIS TASK COVERS:
a. Removal
b. Installation
APPLICABLE MODELS
REFERENCES (TM)
All
TM 9-2320-272-10
TM 9-2320-272-24P
General mechanic's tool kit (Appendix E, Item 1)
EQUIPMENT CONDITION
l Parking brake set (TM 9-2320-272-10).
l Battery ground cables disconnected (para. 3-126).
NOTE
Two different types of light switches are used.
a. Removal
Remove three screws (8), washers (7), switch levers (6), and washers (5) from main light switch (1).
1.
NOTE
Switch is removed from behind instrument panel.
Remove four screws (4) and light switch (1) from instrument panel (3).
2.
Disconnect harness connector (2) from main light switch (1).
3.
Connect harness connector (2) to main light switch (1).
1.
Install main light switch (1) on instrument panel (3) with four screws (4).
2.
Install three washers (5) and switch levers (6) on main light switch (1) with three washers (7) and
3.
screws (8).
3-294
