TM 9-2320-272-24-1
THIS TASK COVERS:
b. Installation
a. Removal
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
All
TM 9-2320-272-10
TM 9-2320-272-24P
TOOLS
EQUIPMENT CONDITION
General mechanic's tool kit (Appendix E, Item 1)
Parking brake set (TM 9-2320-272-10).
MATRIALS/PARTS
Battery ground cables disconnect (para. 3-126).
O-ring (Appendix D, Item 428)
1.
Remove three screws (6) and horn switch assembly (2) from steering column (1).
2.
Disconnect horn switch connector (9) from diode lead (3).
3.
Remove spring (11) and seat (4) from diode lead (3).
4.
Remove retaining ring (8), horn switch (7), and O-ring (10) from adapter (5). Discard O-ring (10).
1.
Install new O-ring (10), horn switch (7), and retaining ring (8) on adapter (5).
2.
Install seat (4) and spring (11) over diode lead (3).
3.
Connect horn switch connector (9) to diode lead (3).
4.
Install horn switch assembly (2) on steering column (1) with three screws (6).
3-286
