TM 9-2320-272-24-1
3-34. ETHER START FUEL PRESSURE SWITCH (M939/A1) REPLACEMENT
THIS TASK COVERS:
b. Installation
a. Removal
INITIAL SETUP:
APPLICABLE MODELS
EQUIPMENT CONDITION
l Parking brake set (TM 9-2320-272-10).
M9391/A1
l Left splash shield removed (TM 9-2320-272-10).
TOOLS
l Battery ground cables disconnected (para. 3-126).
General mechanic's tool kit (Appendix E, Item 1)
REFERENCES (TM)
TM 9-2320-272-10
TM 9-2320-272-24P
a. Removal
NOTE
Have drainage container ready to catch fuel.
1.
Disconnect two wires (2) from ether start pressure switch (3).
2.
Remove ether start fuel pressure switch (3) from bottom of fuel pump (1).
b. Installation
1.
Install ether start fuel pressure switch (3) on bottom of fuel pump (1).
2.
Connect two wires (2) to ether start pressure switch (3).
FOLLOW-ON TASKS: Connect battery ground cables (para. 3-126).
l Install left splash shield (TM 9-2320-272-10).
3-113
