TM 9-2320-272-24-1
3-33. ETHER START SWITCH REPLACEMENT
THIS TASK COVERS:
b. Installation
a. Removal
REFERENCES (TM)
APPLICABLE MODELS
TM 9-2320-272-10
All
TM 9-2320-272-24P
TOOLS
EQUIPMENT CONDITION
General mechanic's tool kit (Appendix E, Item 1)
l Parking brake set (TM 9-2320-272-10).
l Battery ground cables disconnected (para. 3-126).
NOTE
Prior to removal, tag wires for installation.
Disconnect two ether start switch wires (3) from harness wires (2) under left side of dash (1).
1.
Remove nut (5) and ether start switch (4) from left side of dash (1).
2.
b. Installation
Install ether start switch (4) on left side of dash (1) with nut (5).
1.
Connect two ether start switch wires (3) to wiring harness wires (2) under left side of dash (1).
2.
FOLLOW-ON TASK: Connect battery ground cables (para. 3-126).
3-112
