TM 9-2320-272-24-1
Table 2-3. Electrical Troubleshooting (Contd).
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Step
6.
Place battery switch to OFF position.
Step
7.
Connect lead 10 and disconnect lead 37 from circuit breaker.
Step
8.
Place battery switch to ON position.
Step
9.
Connect multimeter negative lead to vehicle chassis ground and positive lead to
lead 37 terminal of circuit breaker. Multimeter should indicate battery voltage.
If battery voltage is not indicated, replace defective circuit breaker (para. 3-105).
END OF TESTING!
2-162
