TM 9-2320-272-24-1
Table 2-1. Unit Preventive Maintenance Checks and Services (Contd).
NOT FULLY
MISSION
PROCEDURE
CAPABLE IF:
4
Annual
Special
CAUTION
body items
Remove filler plug slowly to release pressure. Do not
(Contd)
overfill.
7. Drain, clean, and fill winch hydraulic oil reservoir
[RPL]
and replace filter (para. 3-336) every 12 months.
EXPECTED TEMPERATURES
ABOVE 15F
+40F TO -15F
+40F TO -65F
(ABOVE -9C)
(+4C TO -26C)
(+4C TO -54C)
OE/HDO 10
OE/HDO 30
OE/HDO
Lubricating oil, internal
combustion engine (MIL-L-2104)
OEA
OEA
Lubricating oil, internal
combustion engine (arctic)
(MIL-L-46167)
b. On M934/A1/A2 model vehicles:
1. Expand van body and inspect for damaged or
broken hinges, fasteners, and latches (para. 2-15).
2. Check for bent or binding of components or
damaged seals or panels that would allow light to shine
through or prevent a tight seal. Repair or replace defective
components (para. 2-15).
3. Lubricate worm gear, worm, winch handle shaft,
wire rope, winch barrel shaft, and swing davit base every
12,000 mi. (19,000 km) or 12 months, whichever occurs first.
EXPECTED TEMPERATURES
LUBRICANTS
+80F TO +30F +30F TO -30F
ABOVE
-30 TO -65'
+80F(+27C)
(27C TO -1 "C) (-1C TO -34C)
(-34 TO -54C)
CW-11B
CW-11C
CW-11A
CW
Lubricating oil (VV-L-751)
Oil lubricating, multipurpose
(MIL-L-2105): GO-75
GO-75
4. Lubricate support rollers, end rollers, retractor
beams, sprocket, and sprocket bushings every 12,000 mi.
(19,606 km) or 12 months, whichever occurs first.
EXPECTED TEMPERATURES
ABOVE 15F
+40F TO -15F
+40F TO -65F
(+4C TO -26C)
(ABOVE -9C)
(+4C TO -54C)
All temperatures
GM
Grease, automotive and
artillery (MIL-G-10924)
2-50
