TM 9-2320-260-34-2
17-17. PERSONNEL HEATER CONTROL BRACKET REPLACEMENT (Contd)
3. Connect fuel outlet line (13) on fuel control valve elbow (10). Tighten nut ( 12).
4. Connect two igniter leads (2) on circuit board (4) and ground terminal (11).
5. Install five leads (19) on flame detector switch (18) with five new screw-assembled lockwashers (1).
6. Install two leads (17) on overheat switch (15) with two new nut-assembled lockwashers (16).
7. Install four new tiedown straps (5) on heater wiring.
8. Position guard (7) on heater housing (14) and install with two dzus fasteners (6).
FOLLOW-ON TASK: Install personnel heater (TM 9-2320-260-20).
17-45
