TM 9-2320-260-34-2
Lower swivel valve (4) until plates (21) aline with notches in swivel valve plug (5). Tighten
10.
screws (23).
11.
Remove two screws (2), washers (3), and chain from swivel valve (4) and install original screws (2)
into swivel valve (4). Remove chain from lifting device.
12.
Connect two hoses (8) and (7) to swivel valve (4) and control valve bank.
13.
Install tee fitting (13) on swivel valve (4).
Connect hoist winch drain hose (10) to tee fitting (13).
14.
Connect bushing (12) and control valve bank drain hose (11) to tee fitting (13).
15.
Connect wire (1) to wire (9).
16.
Working under vehicle, connect wire (6) to wire (25).
17.
16-185
