TM 9-2320-260-34-2
16-26. CRANE TURNTABLE MAINTENANCE (M816) (Cont'd)
9. Attach chain to turntable frame (6) and Iifting device with eight washers (16), four screws (17) and
nuts (15). Take up slack in chain.
WARNING
All personnel must stand clear during lifting operations.
A swinging or shifting load may cause injury to personnel.
Ensure lifting capacity is greater than weight of turntable
frame, Failure to do so may result in injury to personnel or
damage to equipment.
NOTE
Assistant will help with step 10.
10. Remove turntable frame (6) from wrecker body (11). Set down on supports. Remove chain from rear
end of turntable frame (6).
16-157
