TM 9-2320-260-34-2
16-17. HOIST WINCH MAINTENANCE (M816) (Contd)
23.
Install new seal (18) and bearing (17) on housing (12).
24.
Install new gasket (11) and housing (12) on gearcase (10) with four new lockwashers (13) and
Screws (14).
25.
Install new woodruff key (9) in wormshaft (19).
26.
Using puller, install drive gear (16) on wormshaft (19).
27.
Install snapring (15) on wormshaft (19).
Install input shaft gear (4) on input shaft (6).
28.
29.
Install input shaft (6) and input shaft gear (4) on housing (12).
Install bearing (8) on cover (20).
30.
Install new gasket (7) and cover (20) on housing (12) with ten new lockwashers (22) and screws (21).
31.
Install new woodruff' key (5) in input shaft (6).
32.
Install new gasket (3) and adapter (23) on cover (20) with four new lockwashers (2) and screws (1).
33.
16-102