TM 9-2320-260-34-2
16-17. HOIST WINCH MAINTENANCE (M816) (Contd)
13.
Install new seal (25) in brake housing (26),
14.
Install new gasket (23) and brake housing (26) on gearcase (2) with four new lockwashers (22), and
screws (21).
Install new woodruff key (24) on worm shaft ( 1).
15.
16.
Install brakedrum (20) on wormshaft (1) with washer (19), new Iockwashers (18), and screw (17).
17.
Install brake band (30) and spring (31) on brake housing (26) and brakedrum (20) with new
seal (34), washer (33), and screw (32).
18.
Install new gasket (29) and cover (28) on brake housing (26) with six new screw-assembled
lockwashers (27).
19.
Install new gasket (35) and plate (46) on gearcase (2) and drum shaft (15) with screw (45).
20.
Install two new woodruff keys (36) on drum shaft (15).
21.
Install thrust washer (44) and drum (43) on drum shaft (15). Tap with soft-head hammer to seat
drum (43) against thrust washer (44) on plate (46).
NOTE
Ensure shims are installed to prerecorded thickness.
22.
Install thrust washer (42), bracket (41), and shim(s) (40) on drum shaft (15) with washer (37), new
lockwashers (39), and screw (38).
16-101
