TM 9-2320-260-34-2
16-17. HOIST WINCH MAINTENANCE (M816) (Contd)
Remove four screws (5) and lockwashers (6), adapter (27), and gasket (7) from cover (26). Discard
1.
lockwashers (6) and gasket (7).
Remove woodruff key (9) from input shaft (10). Discard woodruff key (9).
2.
Remove ten screws (24), lockwashers (25), cover (26), and gasket (11) from housing (16). Discard
3,
lockwashers (25) and gasket (11).
Remove bearing (12) from cover (26).
4.
Remove input shaft gear (8) and input shaft (10) from housing (16).
5.
Remove input shaft gear (8) from input shaft (10).
6,
Remove snapring (19) from wormshaft (23).
7.
Using puller, remove drive gear (20) from wormshaft (23).
8.
Remove woodruff key (13) from wormshaft (23). Discard woodruff key (13).
9.
Remove four screws (18), lockwashers (17), housing (16), and gasket (15) from gearcase (14). Discard
10.
lockwashers (17) and gasket (15).
11.
Remove bearing (21) and seal (22) from housing (16). Discard seal (22).
16-95
