TM 9-2320-260-34-2
16-15. HOIST WINCH MOTOR REPLACEMENT (M816) (Contd)
1.
Wrap male threads on elbows (1) and (16) with antiseize tape.
Install elbows (1) and (16) on winch hydraulic motor (2).
2.
Position coupling (6) on shaft (15) of hydraulic winch (10).
3.
Install new woodruff key (3) on shaft (4) of winch hydraulic motor (2).
4.
Install new gasket (5) and winch hydraulic motor (2) on hydraulic winch (10) with four new
5.
Install hoses (13) and (14) on elbows (1) and (16).
6.
Install clamp (7) on hoses (13) and (14) and boom (9) with new locknut (8).
7.
FOLLOW-ON TASKS: Z Fill hydraulic oil reservoir (LO 9-2320-260-12).
q Start engine and check crane winch operation (TM 9-2320-260-10).
16-91