TM 9-2320-260-34-2
16-3. FRONT WINCH LEVEL WIND MAINTENANCE (Contd)
3. Inspect track frame (2) and four trolley wheels (3) for cracks, breaks, broken welds, and chips or
nicked wheel surfaces (1). Repair or replace track frame (2) or trolley wheels (3) if cracked, broken,
chipped, or nicked.
4. Inspect two axles (5) for cracks, breaks, obstructed lube holes (6), and nicked and scored thrust
washer surfaces (7). Refer to table 16-3, Level Wind Parts Wear Limits, for measurements. Replace
axle (5) if damaged or worn.
NOTE
Perform steps 5 and 6 if axle fails inspection in step 4.
5. Using arbor press, remove axle (5) from trolley frame (8).
6. Apply light coat of GAA grease to axle (5). Using arbor press, install axle (5) in trolley frame (8).
16-22
