TM 9-2320-260-34-2
15-28. REAR DOORS MAINTENANCE (Contd)
4. Remove seven rivets (29) and seal (28) from door frame (6). Discard rivets (29) and seal (28).
NOTE
Perform step 5 for left-rear door.
5. Remove four screws (12), clip (11), six screws (25), and bracket (26) from inner panel (8).
NOTE
Perform step 6 for right-rear door.
6. Remove three rivets (33), handle (32), and gasket (31) from door (6). Discard gasket (31) and
rivets (33).
7. Remove two cotter pins (20), screws (17), lockwashers (18), and rods (13) from center case (24)
and two bolts (15). Discard cotter pins (20) and lockwashers (18).
8. Remove pins (22) and (23) and handle (21) from center case (24).
9. Remove four screws (19) and center case (24) from inner panel (8).
NOTE
q Perform step 10 for left-rear door on M820 and M820A2 vehicles.
q Perform step 11 for left-rear door on M820A1 and all right-rear
doors.
10. Remove eight screws (16), two bolts (15), and spacer plates (14) from inner panel (8).
11. Remove eight screws (16) and two bolts (15) from inner panel (8).
12. Remove sixteen screws (1), retainer (2), seal (3), hinge (4), and seal (5) from door (6). Discard
seals (3) and (5).
13. Remove eleven screws (9), thirty-two screws (10), and inner panel (8) from door (6).
14. Break adhesive seal and remove four moldings (7) and (27) from inner panel (8).
NOTE
Perform step 15 for Ieft-rear door.
15. Break adhesive seal and remove weatherseal (30) from door (6). Discard weatherseal (30).
15-88
