TM 9-2320-260-34-1
10-8. DIFFERENTIAL AND DIFFERENTIAL CARRIER REPAIR (Contd)
29.
Place bevel ring gear (21) in differential carrier housing (6) with hub and bearing (15) pointing
toward bore (22).
30.
Support bevel ring gear (21) with two soft-iron semi-circular blocks (24). Use support adapter (23)
as an alternate method.
NOTE
White carbonate pigment is used as high pressure lubricant.
31.
Coat keyed end (19) of bevel ring gear (21) with pigment lubricant and aline over bore in bevel ring
gear (21). Ensure machine key (17) is alined with keyway in bevel ring gear (21).
32.
Using arbor press, install helical pinion gear (18) end (19) in bore of bevel ring gear. (21).
NOTE
Light tapping with soft-head hammer or use of arbor press maybe
needed to install bearing.
33.
Remove blocks (24), turn differential carrier housing (6) over, and push bearing (15) into sleeve (16).
10-39
