TM 9-2320-260-34-1
8-3. TRANSMISSION GEARSHIFT LEVER MAINTENANCE
THIS TASK COVERS:
d. Assembly
a. Removal
e. Installation
b. Disassembly
c. Inspection
INITIAL SETUP
REFERENCES (TM)
APPLICABLE MODELS
TM 9-2320-260-20
All
TM 9-2320-260-34P-1
TOOLS
EQUIPMENT CONDITION
General mechanic's tool kit
(Appendix B, Item 1)
Shift lever knob and boot removed
(TM 9-2320-260-20).
MATERIALS/PARTS
Cab tunnel removed (TM 9-2320-260-20).
Lockwasher (Appendix D, Item 237)
Snapring (Appendix D, Item 512)
Remove screw (9), lockwasher (8), gearshift lever (1), and retainer (5) from gearshift lever housing (7).
Discard lockwasher (8).
b. Disassembly
1. Remove snapring (3), spring (4), and cup (2) from gearshift lever (1). Discard snapring (3).
2. Remove pin (6) and gearshift lever (1) from retainer (5).
1.
Inspect gearshift lever (1) for twist, bends, cracks, and breaks. Replace gearshift lever(1) if
damaged.
2. Inspect retainer (5) for cracks, breaks, and wear. Replace retainer (5) if damaged.
1.
Install gearshift lever (1) in retainer (5) with pin (6).
2. Install cup (2) and spring (4) on gearshift lever (1) with new snapring (3).
Install gearshift lever (1) and retainer (5) in gearshift lever housing (7) with new lockwasher (8) and
screw (9).
