TM 9-2320-260-34-1
14.
Loosen bar clamp (9) and slide fuel pump (3) and ring and adapter bracket (10) back from test and
drive coupling (1).
15.
Remove coupling drive (2) from test stand drive coupling (1).
16.
Remove four screws (7), washers (8), and fuel pump (3) from ring and adapter bracket (10).
17.
Remove nut (15), lockwasher (14), washer (13), screw (17), washer (16), and throttle lever (12) from
throttle lever shaft (19). Discard lockwasher (14).
18.
Install cover (11) on fuel pump (3) with two screws (18).
Install lever (12) on accelerator shaft (19) with screw (17), washer (16), washer (13), new lock-
19.
washer (14), and nut (15).
Install new safety wire (4) on throttle leakage adjusting screw (6) and governor adjusting screw (5).
20.
Plug or cover all open ports or holes on pump and test stand.
FOLLOW-ON TASKS:
5-90