TM 9-2320-260-34-1
3-81. ENGINE INJECTOR TIMING INSTRUCTIONS (Contd)
13.
Ensure cam follower housing screws are tightened 30-35 lb-ft (4 1-47
14.
Check position of both dial indicators. Ensure dial indicators are not bottoming or binding.
15.
Ensure engine is at TDC (step 2).
16.
Recheck timing (steps 3 through 11).
17.
If timing is still incorrect, add or remove cam follower gaskets (para. 3-41). Add gaskets to advance
timing remove gaskets to retard timing.
18.
Remove timing fixture from engine (1).
Install crossheads (para, 3-63).
FOLLOW-ON TASKS:
3-236