TM 9-2320-260-34-1
3-79. INJECTOR SLEEVE MAINTENANCE (Contd)
c. Installation
Ensure injector sleeve seat and injector sleeve bore are free of oil,
carbon, and other foreign material.
1. Apply lubricating oil to new O-ring (2) and install new O-ring (2) on groove of injector sleeve bore (1).
2. Using injector sleeve mandrel, install new injector sleeve (4) into injector sleeve bore (1).
3. Insert injector sleeve holding tool in cylinder head (3). Tighten nut 35-40 lb-ft (47-54
4. Using injector sleeve mandrel and soft-head hammer, drive injector sleeve (4) until it bottoms.
Retighten nut 35-40 lb-ft (47-54
3-224
