TM 9-2320-260-34-1
Table 2-1. Mechanical Troubleshmting (Contd).
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
75. PLATFORM DOES NOT STOP AT
PROPER HEIGHT
Check elevating kickout screw.
a. Adjust kickout screw for correct height (para. 15-52).
b. Replace kickout screw if defective (para. 15-52).
END OF TESTING!
76. LIFTGATE AT
INCORRECT ANGLE WHEN CLOSED
Step 1. Check for bent or obstructed control linkage.
Replace control linkage parts if damaged (para. 15-55).
Step 2. Check kickout screw adjustment in lowered position.
Adjust kickout screw as necessary (para. 15-52).
END OF TESTING!
77. LIFTGATE FAILS TO
OPERATE ON
REMOTE CONTROL
Step 1. Check detent springs.
Replace detent springs if broken or missing (para. 15-55).
Step 2. Check for power failure at auxiliary pump.
Replace auxiliary pump if defective (para. 15-56).
END OF TESTING!
78. LIFTGATE FAILS TO
OPERATE ON
MANUAL (LEVER) CONTROL
Step 1. Check if detent springs drop out of detent position.
Replace detent springs if broken or missing (para. 15-55).
Step 2. Check control linkage adjustment.
a. Adjust control linkage (para. 15-55).
b. Replace parts if damaged (para. 15-55).
END OF TESTING!
WINTERIZATION KITS
ENGINE COOLANT HEATER
79. HEATER DOES NOT START
Step 1. Remove heater from vehicle (TM 9-2320-260-20) and perform bench test (para. 17-12).
Replace all defective parts (paras. 17-3 through 17-12).
Step 2. Replace burner (para. 17-10).
END OF TESTING!
80. BLOWER RUNS IN
START POSITION; HEATER FAILS TO
IGNITE
Step 1. Test fuel control valve (para. 17-12).
Replace fuel control valve if defective (para. 17-7).