TM 9-2320-260-20
Section XI. VAN CABLE REEL KIT MAINTENANCE
PARA.
PAGE
TITLE
NO.
NO.
Van Cable Reel Maintenance
Van Cable Reel Main Support Replacement
THIS TASK COVERS:
c. Assembly
a. Removal
b. Disassembly
d. Installation
INITIAL SETUP
REFERENCES (TM)
APPLICABLE MODELS
TM 9-2320-260-10
M820, M820A1, M820A2
TM 9-2320-260-20P
MATERIALS/PARTS
EQUIPMENT CONDITION
Four lockwashers
Parking brake set (TM 9-2320-260-10).
Three cotter pins
Cable reel cover removed (TM 9-2320-260-10).
Electrical cable removed (TM 9-2320-260-10).
NOTE
Left and right cable reels are maintained the same way. This
procedure covers the left cable reel.
1. Remove cotter pin (5) from housing (3).
2. Remove four nuts (8), lockwashers (7), screws (2), and cable reel (1) from support (6). Discard
lockwashers (7).
3. Remove screw (9), chain (4), and cotter pin (5) from support (6). Discard cotter pin (5).
b. Disassembly
1. Remove two cotter pins (10), four bushings (11), three spacers (12), two spacers (13), and
housings (3) from shaft (14). Discard cotter pins (10).
2. Remove shaft (14) from cable reel (1).
1. Insert shaft (14) in cable reel (1).
2. Install two housings (3), spacers (13), three spacers (12), and four bushings (11) on shaft (14) with
two new cotter pins (10).
d. Installation
1. Install cable reel (1) on support (6) with four screws (2), new lockwashers (7), and nuts (8).
2. Install new cotter pin (5) and chain (4) on support (6) with screw (9).
3. Aline hole of shaft (14) with hole of housing (3) and install cotter pin (5).
14-116
