TM 9-2320-260-20
1.
Install hose (11) on water manifold valve (13) and tighten clamp (12).
2.
Install hose (14) on engine oil cooler valve (16) and tighten clamp (15).
3.
Route hose (14) along frame brackets (18) and install on pump elbow (23). Tighten clamp (24).
4.
Route hose (11) through hole in cab tunnel (5) and install on upper battery heater pad (2). Tighten
clamp (1).
5.
Install hoses (28) and (32) on lower battery heater pad (30) and tighten two clamps (31).
6.
Install hose (32) on upper battery heater pad (2) and tighten clamp (22).
7.
Install hose (28) on heater-battery box valve (26) and tighten clamp (27).
8.
Install hoses (28) and (32) on battery box (25) with bracket (35), two clamps (34), screws (33),
and new locknuts (29).
9.
Install hose (14) on brackets (18) with two clamps (19), screws (17), and new locknuts (20).
10.
Install hose (11) on cab tunnel (5) and clutch housing (6) with two clamps (3), screws (4), and
new locknuts (21).
NOTE
Assistant will help with step 11.
11.
Install hose (11) on firewall (8) with clamp (9), screw (10), and new locknut (7).
14-34
