TM 9-2320-260-20
I
13-30. WRECKER HYDRAULIC OIL FILTER ELEMENT REPLACEMENT
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP
APPLICABLE MODELS
REFERENCES (TM)
M816
LO 9-2320-260-12
TM 9-2320-260-10
MATERIALS/PARTS
TM 9-2320-260-20P
O-ring
EQUIPMENT CONDITION
Parking brake set (TM 9-2320-260-10).
Hydraulic oil reservoir drained
q
(LO 9-2320-260-12).
NOTE
Have drainage container ready to catch hydraulic oil.
1. Remove four screws (9), rear cover (8), and filter element (1) from hydraulic oil filter housing (4).
2. Remove filter element (1) and O-ring (7) from rear cover (8). Discard O-ring (7).
3. Remove seal ring (3) from front head (2).
4. Remove three screws (6), rear head (5), and filter element (1) from front head (2).
1. Install filter element (1) on front head (2) with rear head (5) and three screws (6).
2. Install seal ring (3) on front head (2).
3. Position new O-ring (7) and filter element (1) on rear cover (8).
4. Install filter element (1) and rear cover (8) on hydraulic oil filter housing (4) with four screws (9).
13-74