TM 9-2320-260-20
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP
APPLICABLE MODELS
REFERENCES (TM)
M818
TM 9-2320-260-10
TM 9-2320-260-20P
MATERIAIS/PARTS
EQUIPMENT CONDITION
Fifteen locknuts
Parking brake set (TM 9-2320-260-10).
1. Remove three locknuts (14), washers (13), and screws (10) from support plate (11) and fuel tank
hanger (15). Discard locknuts (14).
2. Remove three locknuts (7) washers (8), screws (12), and support plate (11) from splash guard (4).
Discard locknuts (7).
9. Remove six locknuts (6), washers (5), screws (3), and splash guard (4) from bracket (9). Discard
locknuts (6).
4. Remove three locknuts (1), screws (2), and bracket (9) from frame (16). Discard locknuts (1).
1. Install bracket (9) on frame (16) with three screws (2) and new locknuts (1).
2. Install splash guard (4) on bracket (9) with six screws (3), washers (5), and new locknuts (6).
3. Install support plate (11) on splash guard (4) with three screws (12), washers (8), and new
locknuts (7).
4. Install support plate (11) on fuel tank hanger (15) with three screws (10), washers (13), and new
locknuts (14).
12-133
