TM 9-2320-260-20
THIS TASK COVERS:
b. Installation
a. Removal
INITIAL SETUP
REFERENCES (TM)
APPLICABLE MODELS
TM 9-2320-260-10
M820A1 WO/W, M820A2 WO/W
TM 9-2320-260-20P
MATERIALS/PARTS
EQUIPMENT CONDITION
Ten locknuts
Parking brake set (TM 9-2320-260-10).
1. Remove four locknuts (12), screws (2), washers (3), and tool kit bracket (1) from two mounting
brackets (9). Discard locknuts (12).
2. Remove four locknuts (5), screws (8), three spacers (7), and two mounting brackets (9) from rail (6).
Discard locknuts (5).
3. Remove two locknuts (11), screws (4), and support bracket (10) from rail (6). Discard locknuts (11).
1. Install support bracket (10) on rail (6) with two screws (4) and new locknuts (12).
2. Install two mounting brackets (9) on rail (6) with four screws (8), three spacers (7), and four new
locknuts (5).
3. Install tool kit bracket (1) on two mounting brackets (9) with four screws (2), washers (3), and new
locknuts (12).
