TM 9-2320-260-20
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP
APPLICABLE MODELS
EQUIPMENT CONDITION
M820, M820A1, M820A2
Parking brake set (TM 9-2320-260-10).
External power source disconnected
REFERENCES (TM)
(TM 9-2320-260-10).
TM 9-2320-260-10
Battery ground cable disconnected (para. 4-48).
TM 9-2320-260-20P
NOTE
The six blackout and emergency lamps are replaced the same way.
This procedure covers one blackout and emergency lamp only.
1. Remove two screws (5) and lens (3) from blackout and emergency lamp future (1).
2. Remove two lamps (2) from fixture (1).
b. Installation
1. Install two lamps (2) in future (1).
2. Install lens (3) on blackout and emergency lamp fixture (1) with two screws (5).
Connect external power source (TM 9-2320-260-10).
