TM 9-2320-260-20
THIS TASK COVERS:
b. Installation
a. Removal
INITIAL SETUP
EQUIPMENT CONDITION
APPLICABLE MODELS
Parking brake set (TM 9-2320-260-10).
M820, M820A1, M820A2
q Van body side panels expanded (TM 9-2320-260-
MATERIALS/PARTS
10).
Four lockwashers
Side door opened (rear locks only)
Two cotter pins
(TM 9-2320-260-10).
REFERENCES (TM)
TM 9-2320-260-10
TM 9-2320-260-20P
1.
Remove eight screws (7) and plate (9) from side panel wall (17).
2. Remove cotter pins (1) and (19), clevis pins (6) and (10), and clevises (2) and (5) from two lock
arms (11) and bars (3) and (8). Discard cotter pins (1) and (19).
3. Remove nut (13) and washer (12) from handle shank (20).
4. Remove four nuts (14), lockwashers (15), and lock (16) from wall panel (4). Discard lockwashers (15).
5. Remove two screws (21) and retainer (18) from side panel wall (17).
1.
Install retainer (18) on side panel wall (17) with two screws (21).
2.
Install lock (16) on wall panel (4) with four new lockwashers (15) and nuts (14).
3. Install washer (12) and nut (13) on handle shank (20).
4. Install clevises (2) and (5) on two lock arms (11) and bars (3) and (8) with clevis pins (6) and (10) and
new cotter pins (1) and (19).
5. Install plate (9) on side wall panel (17) with eight screws (7).
12-52
