TM 9-2320-260-20
I
THIS TASK COVERS:
a. Roof Panel Seals Removal
e. Side Panel Seals Installation
f. Wall Panel Seals Installation
b. Floor Panel Seals Removal
c. Wall Panel Seals Removal
g. Floor Panel Seak Installation
h. Roof Panel Seals Installation
d. Side Panel Seals Removal
INITIAL SETUP
APPLICABLE MODELS
REFERENCES fTM)
M820, M820A1, M820A2
TM 9-2320-260-10
TM 9-2320-260-20P
MATERIAIS/PARTS
EQUIPMENT CONDITION
Two hundred six rivets
Twenty-six seals
q Parking brake set (TM 9-2320-260-10).
Four seal blocks
Van body side panels expanded
Adhesive (Appendix C, Item 2)
(TM 9-2320-260-10).
q Roof and floor panels open (TM 9-2320-260-10).
NOTE
The right and left roof, floor, side, and wall panel seals are
replaced basically the same way.
q Remove seal remains and adhesive from all panels.
1. Remove twenty-four rivets (9), two retainers (8), and seals (10) from roof panel (1). Discard rivets (9)
and seals (10).
2. Remove seal (4) from roof panel (1). Discard seal (4).
3. Remove fifty-two rivets (7), retainer (6), and seal (5) from roof panel (1). Discard rivets (7) and
seal (5).
4. Remove two seal blocks (2) and seals (3) from roof panel (1). Discard seals (3) and seal blocks (2).
1. Remove thirty screws (15), two retainers (14), four seals ( 13), and two channels (12) from floor
panel (11). Discard seals (13).
2. Remove forty-one rivets (17) and seal (16) from floor panel (11). Discard rivets (17) and seal (16).
12-46
