TM 9-2320-260-20
THIS TASK COVERS:
a. Lower Splash Guard Removal
c. Upper Splash Guard Installation
b. Upper Splash Guard Removal
d. Lower Splash Guard Installation
INITIAL SETUP
APPLICABLE MODELS
REFERENCES (TM)
M813, M814
TM 9-2320-260-10
TM 9-2320-260-20P
MATERIALS/PARTS
EQUIPMENT CONDITION
Ten locknuts
Parking brake set (TM 9-2320-260-10).
I
a. Lower Splash Guard Removal
1.
Remove two locknuts (10), screws (11), and braces (6) from upper splash guard (13) and lower splash
guard (8). Discard locknuts (10).
2. Remove three locknuts (12), screws (7), retainer strip (9), and lower splash guard (8) from upper
splash guard (13). Discard locknuts (12).
I
b. Upper Splash Guard Removal
1. Remove two locknuts (5), screws (4), and braces (6) from frame (3). Discard locknuts (5).
2. Remove three locknuts (1), screws (14), and upper splash guard (13) from frame (2). Discard
locknuts (1).
1.
Install upper splash guard (13) on frame (2) with three screws (14) and new locknuts (l).
Install two braces (6) on frame (3) with two screws (4) and new locknuts (5).
2.
1. Install lower splash guard (8) on upper splash guard (13) with retainer strip (9), three screws (7),
and new locknuts (12).
2.
Install two braces (6) on upper splash guard (13) and lower splash guard (8) with two screws (11)
and new locknuts (10).
12-10
