TM 9-2320-260-20
I
THIS TASK COVERS:
d. Pump Installation
a. Jet Removal
e. Tubing Installation
b. Tubing Removal
f. Jet Installation
c. Pump Removal
INITIAL SETUP
REFERENCES (TM)
APPLICABLE MODELS
TM 9-2320-260-10
All
TM 9-2320-260-20P
MATERIALS/PARTS
EQUIPMENT CONDITION
Locknut
Parking brake set (TM 9-2320-260-10).
Hood raised and secured (TM 9-2320-260-10).
Remove nut (4), rubber washer (3), and jet (2) from cowling (6).
NOTE
Tag all tubing for installation.
1. Remove
cover (17), grommet (18), tubing (10), and strainer (16) from reservoir (15).
2. Remove
strainer (16) from tubing (10). Remove tubing (10) from grommet (18) and cover (17).
3. Remove
strap (20) from tubing (7) and speedometer cable (5).
4. Remove
tubing (19), (7), and (10) from tee (8).
5. Remove
tubing (1), (7), and (21) from valve (22).
6. Remove
tubing (1) and (19) from pump (12).
7. Remove
tubing (10) from grommet (14). Remove grommet (14) from dash panel (23).
Remove locknut (9), screw (13), and pump (12) from instrument panel (11). Discard locknut (9).
Install pump (12) on instrument panel (11) with screw (13) and new locknut (9).
I
I
e. Tubing Installation
1. Install grommet (14) in dash panel (23) and install tubing (10) through grommet (14).
2. Install tubing (1) and (19) on pump (12).
3. Install tubing (1), (7), and (21) on valve (22).
4. Install tubing (19), (7), and (10) on tee (8).
5. Install tubing (7) on speedometer cable (5) with strap (20).
6. Install tubing (10) through grommet (18) and cover (17).
7. Install strainer (16) on tubing (10).
8. Install cover (17), grommet (18), tubing (10), and strainer (16) on reservoir (15).
11-70
