TM 9-2320-260-20
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP
REFERENCES (TM)
APPLICA8LE MODELS
TM 9-2320-260-10
All
TM 9-2320-260-20P
MATERIALS/PARTS
EQUIPMENT CONDITION
Five locknuts
Parking brake set (TM 9-2320-260-10).
External-tooth lockwasher
1. Remove three screws (9), washers (8), locknuts (11), and front shield (10) from fender support
shield (7) and side shield (13). Discard locknuts (11).
2. Remove screw (5), two washers (6), and locknut (12) from side shield (13). Discard locknut (12).
screw (15), washer (14), and side shield (13) from frame (16) and fender (1). Discard locknut (4)
and lockwasher (2).
1. Install side shield (13) on fender (1) and frame (16) with screw (15), washer (14), new external-tooth
lockwasher (2), alternator ground cable connector (3), and new locknut (4).
2. Install top of side shield (13) on frame (16) with screw (5), two washers (6), and new locknut (12).
3. Install front shield (10) on fender support shield (7) and side shield (13) with three screws (9),
washers (8), and new locknuts (11).
11-48
