TM 9-2320-260-20
9-2. JACKING AND SUPPORTING VEHICLE (Contd)
h. Raising and Supporting Rear Frame
NOTE
Perform task d to support entire vehicle at frame.
1.
Perform task f, but do not remove hydraulic jack (4).
2.
Remove rear wheels (3) (para. 9-3).
3.
Raise vehicle until weight is off jack stands (5) and place jack stands (5) under frame (7), in front of
and behind spring brackets (8). Adjust jack stands (5) to reduce lowering distance.
4.
Lower vehicle onto jack stands (5) and remove hydraulic jack (4).
i. Lowering Rear Frame
1. Center hydraulic jack (4) under bogie (6) and raise vehicle off jack stands (5).
2. Remove jack stands (5) from frame (7) and place under spring brackets (8). Adjust jack stands (5)
to reduce lowering distance.
3. Lower vehicle onto jack stands (5), but do not remove hydraulic jack (4).
4. Install rear wheels (3) (para. 9-3).
5. Lower rear axles (2) (task g).
6. Perform task e if front flame is raised, or remove chocks from front wheels as necessary.
