TM 9-2320-260-20
I
THIS TASK COVERS
a. Removal
c. Check and Adjustment
-
b. Installation
INITIAL SETUP
APPLICABLE MODELS
EQUIPMENT CONDTION
All
ZParking brake set (TM 9-2320-260-10).
ZHood raised and secured (TM 9-2320-260-10).
MATERIALS/PARTS
Z Air reservoir drained (TM 9-2320-260-10).
Two lockwashers
GENERAL SAFETY INSTRUCTIONS
AntiSeize tape (Appendix C, Item 30)
Do not disconnect air lines before draining air
REFERENCES (TM)
reservoirs.
TM 9-2320-260-10
TM 9-2320-260-20P
WARNING
Do not disconnect air lines before draining air reservoir. Small
parts under pressure may shoot out with high velocity, causing
injury to personnel.
1. Disconnect air line (6) from elbow (5).
2. Disconnect air lines (7) and (9) from tee (8).
3. Remove two screws (2), lockwashers (3), and governor (4) from firewall (1). Discard lockwashers (3).
4. Remove elbow (5) and tee (8) from governor (4).
1. Apply antiseize tape to male threads of elbow (5) and tee (8).
2. Install tee (8) and elbow (5) on governor (4).
3. Install governor (4) on firewall (1) with two new lockwashers (3) and screws (2).
4. Connect air lines (7) and (9) to tee (8).
5. Connect air line (6) to elbow (5).
8-54
