TM 9-2320-260-20
I
8-16. BRAKE PEDAL REPLACEMENT
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP
APPLICABLE MODELS
REFERENCES (TM)
All
TM 9-2320-260-10
TM 9-2320-260-20P
MATERIALS/PARTS
EQUIPMENT CONDITION
Locknut
Chalk (Appendix C, Item 10)
Parking brake set (TM 9-2320-260-10).
1. Using chalk, mark position of brake pedal (2) next to cab floor (5).
2. Remove locknut (7), screw (4), brake pedal (2), and rubber bumper (1) from brake lever (6). Discard
locknut (7).
3. Remove rubber pad (3) from brake pedal (2). Replace if damaged.
1. Install rubber pad (3) on brake pedal (2).
2. Place rubber bumper (1) and brake pedal (2) on brake lever (6), aline chalk mark on brake pedal (2)
with cab floor (5), and install with screw (4) and new locknut (7).
8-36
