TM 9-2320-260-20
THIS TASK COVERS:
b. Installation
a. Removal
INITIAL SETUP
EQUIPMENT CONDITION
APPLICABLE MODELS
Wheels chocked (TM 9-2320-260-10).
All
Parking brake released (TM 9-2320-260-10).
MATERIALS/PARTS
Parking brakeshoes removed (para. 8-4).
Six stud bolts
Cotter pin
REFERENCES (TM)
TM 9-2320-260-10
TM 9-2320-260-20P
1. Remove cotter pin (l), nut (9), and washer (8) from flange (2) and transfer output shaft (5). Discard
cotter pin (l).
2. Remove flange (2), brakedrum (7) with shield (3), and deflector (4) from transfer output shaft (5).
3. Remove shield (3) and six stud bolts (6) from brakedrum (7). Discard stud bolts (6).
b. Installation
1. Install shield (3) on brakedrum (7) with six new stud bolts (6).
2. Install deflector (4), brakedrum (7) with shield (3), and flange (2) on transfer output shaft (5).
3. Install washer (8) and nut (9) on transfer output shaft (5) and flange (2). Tighten nut (9)
300-600 lb-ft (407-814 Nm).
4. Install new cotter pin (1) through nut (9) and transfer output shaft (5).
--
FOLLOW-ON TASK Install parking brakeshoes (para. 8-4).
8-12
