TM 9-2320-260-20
I
THIS TASK COVERS:
b. Installation
a. Removal
INITIAL SETUP
REFERENCES (TM)
APPLICABLE MODELS
TM 9-2320-260-10
All
TM 9-2320-260-20P
MATERIALS/PARTS
EQUIPMENT CONDITION
Two lockwashers
Parking brake set (TM 9-2320-260-10).
Locking plate
q Hood raised and secured (TM 9-2320-260-10).
a. Removal
1. Remove dipstick (6) from dipstick tube (7).
2. Remove nut (12), lockwasher (11), washer (10), screw (5), clamp (9), and dipstick tube (7) from
bracket (13). Discard lockwasher (11).
3. , Remove dipstick tube (7) and adapter (8) from engine (1).
4. Remove nut (16), lockwasher (15), washer (14), screw (4), and bracket (13) from bracket (17).
Discard lockwasher (15).
5. Bend tabs of locking plate (2) away from screw (3).
6. Remove screw (3), locking plate (2), and bracket (17) from engine (1). Discard locking plate (2)
1.
Install bracket (17) on engine (1) with new locking plate (2) and screw (3). Tighten screw (3)
20-25 lb-ft (27-34 Nm).
Bend tabs of locking plate (2) over head of screw (3).
2.
3.
Install bracket (13) on bracket (17) with screw (4), washer (14), new lockwasher (15), and nut (16).
Finger tighten nut (16).
Install adapter (8) and dipstick tube (7) on engine (1).
4.
Install clamp (9) and dipstick tube (7) on bracket (13) with screw (5), washer (10), new
5.
lockwasher (11), and nut (12).
6.
Tighten nut (16).
7.
Install dipstick (6) in dipstick tube (7).
3-2
