TM 11-7440-293-14
4-66. REMOVING ANGLE BRACKETS FROM PP-4763 POWER SUPPLY.
This task covers:
Removal
INITIAL SETUP
Tools
Personnel Required
One mechanic
7/16-inch box end wrench
Materials/Parts
Equipment Condition
Power supply removed from
None
floor. (See paragraph 4-60.)
ACTION
REMARKS
ITEM
LOCATION
Screw (1) and
1. Left side of power
Using two 7/16-inch box wrenches, remove.
There are three screws. Step 1
Iockwasher (2)
supply
is typical for all three screws.
Do step 1 again.
Screws (3)
2.
Remove.
3.
Angle bracket (4)
Do steps 1, 2 and 3 again.
Angle bracket (5)
4. Right side of
See paragraph 4-13 for installation.
power supply
4-128
