TM 11-7440-293-14
4-57. PREPARING POWER CABLE FOR CONNECTION TO POWER SUPPLY.
This task covers:
Installation
INITIAL SETUP
Personnel Required
Tools
One mechanic
Pliers
Wire strippers
Flat-tip screwdriver
Equipment Condition
Materials/Parts
Plug installed on end of 4-foot cable.
Outlet box installed on power supply.
Power supply
Power cable
Cable connector
Conduit locknut
ACTION
REMARKS
ITEM
LOCATION
Using wire strippers, strip 12 inches of
1.
Opposite Hubbell
Outer
outer insulation.
insulation (1)
connector plug on
power cable
Using wire strippers, strip 5/8 inch of
Power cable
2.
Black wire (2),
insulation from each wire.
white wire (3) and
green wire (4)
Using flat-tip screwdriver, remove.
3.
Screws (5) and
outlet box
cover (6)
Using flat-tip screwdriver, remove.
Knockout plug (7)
Top of outlet box
4.
Using pliers, install.
Outlet box
5.
Cable connector
(8) and conduit
locknut (9)
Power cable (10)
Cable connector
6.
Using flat-tip screwdriver, install.
and screws (11)
Install.
7.
Black wire (2) and
Inside power
white wire (3)
supply
4-106
